Auto's & voertuigen

Coil-over Springs Are Installed, Ride Height Set, The Jumpacan Is Officially A Roller!!

In todays episode were installing the coil-over springs and setting our ride height. And then we start working on a custom axle adapter for the manual transmission.
Check out the eastwood mini mill here:
❱ Shop -
❱ Patreon -
❱ Facebook - bisforbuild
❱ Instagram - bisforbuild
❱ Twitch -
Fareoh - Cloud Ten


  1. Lee Tingler

    Lee Tingler

    3 dagen geleden

    What ever happened to the boat?

  2. Travis Fender

    Travis Fender

    4 dagen geleden

    I don't know if anyone has pointed it out yet but, of you need to counter-sink for hex head bolts (or anything with a 90 flange) use Forstner bits. You can find a small set @ the "blue" store for around $30.

  3. JFRED254


    4 dagen geleden

    Ok... I'm all for B is for Build but this "Offroad Vehicle" has like 8 inches of ground clearance... call it a sand rail or something if you want but this is not an offroad vehicle

  4. Nafiz Ali

    Nafiz Ali

    5 dagen geleden

    Where is the supra????? It’s been more than a year since you said it was being shipped over

  5. Brandon Faulkner

    Brandon Faulkner

    5 dagen geleden

    It's a giant RC car

  6. Tung Thanh

    Tung Thanh

    5 dagen geleden

    it still mal or auto

  7. chris


    6 dagen geleden

    Chris! Check out Wheelers Builders channel on youtube they are building a Lambotruck.

  8. Tsino


    6 dagen geleden

    Where's the single seater race car?

  9. MoonBuilt Garage

    MoonBuilt Garage

    6 dagen geleden

    This thing is turning out SICK!! It will be interesting to see how the low ride height is going to perform, especially after the first time getting some air.

  10. SuperStone


    7 dagen geleden

    That's a long cv axle

  11. M4D_MARK_XTr3Me


    7 dagen geleden

    Yeah that's called a Countersunk not flat head or domed. You just need to dill out the plastic abit more to fit those cap screws...

  12. Douglas Woodard

    Douglas Woodard

    7 dagen geleden

    so what ever happened to the yacht

  13. Ben Basstoise

    Ben Basstoise

    7 dagen geleden

    I laterally just realized your building the Bruce Waynemobile but you cant say that name kinda like that 1967 Stang. 🕵🕵🕵🕵🕵🕵🕵🕵🕵🕵🕵🕵

  14. Birdo1981


    7 dagen geleden

    I would have thought one end should float/slide and the other fixed for the axle otherwise it will get stretched or compressed? That or the geometry is perfect and it can be fixed at both ends...

  15. GEEzyPvt105


    7 dagen geleden

    I expect to see this in the next Batman movie

  16. sSHaDoW cRUiZer2o3

    sSHaDoW cRUiZer2o3

    8 dagen geleden

    oooh kill eM!!!!!!!!!!!!!!!!!!

  17. Jeffrey Long

    Jeffrey Long

    8 dagen geleden

    That thing is awesome, and is coming along great however a boat update would be nice.

  18. Jack Hack700

    Jack Hack700

    8 dagen geleden

    That 3D printed part won’t last very long at all

  19. Lee


    8 dagen geleden

    New subscriber can't wait to see it wen it's done

  20. Peter Ingram

    Peter Ingram

    8 dagen geleden

    Look what I found from Russia!

    • Peter Ingram

      Peter Ingram

      8 dagen geleden

      This is the guys that set fire to a Merc in the field, and drove the Porche through the dealership window!

    • Peter Ingram

      Peter Ingram

      8 dagen geleden

  21. JL GIII


    8 dagen geleden

    What happened to the boat?

  22. Akamjot Singh

    Akamjot Singh

    8 dagen geleden


  23. Joe Gil

    Joe Gil

    9 dagen geleden

    Hey Chris, I'm Joe.....I have been following your videos and I also follow some of the other vloggers who restore cars. I am a car guy as well and I do mostly JDM cars....I used to live in Los Angeles and now living in the Philippines. I would like to connect with you further cuz Im currently working on a car parts app with my brother and a friend who is still based in Los Angeles. Maybe I can reach out via email so that I can talk to you about the app we are creating. I really appreciate your time. Thank you

  24. D.T. Customs

    D.T. Customs

    9 dagen geleden

    But what about the single seat racecar

  25. journogonzo


    9 dagen geleden

    Love this build

  26. Costdelta


    10 dagen geleden

    Thumb nail looks like a canam x3

  27. AUSTIN


    10 dagen geleden

    jumpacan? that name is pretty dumb. how about durtacan? kinda makes 10 times more sense and sounds ten times better

  28. Col Campbell AI 2024

    Col Campbell AI 2024

    10 dagen geleden

    Why not increase the width for all that work?? 😶

  29. trillrif axegrindor

    trillrif axegrindor

    10 dagen geleden

    if you rotated the hub and clamped on the opposite end you could've machined it in the lathe...just saying

  30. Parkerdog 71

    Parkerdog 71

    10 dagen geleden

    I’m new but WHAT IS THAT THING WOW!!!

  31. Akshay B Menon

    Akshay B Menon

    10 dagen geleden

    You should really protect the lathe bed somehow if you use abrasives near it.

  32. Matthew Carrick

    Matthew Carrick

    10 dagen geleden

    The straight ish line on that back bracing looks like it's going to seriously interfere with the wheel in any major bump...

  33. Paul Robert

    Paul Robert

    10 dagen geleden

    Are these guys noobs

  34. jameron


    10 dagen geleden

    imagine it cases a jump

  35. Cam Austin

    Cam Austin

    10 dagen geleden

    rip to your skid plates, where's the ground clearance?

  36. Random Person

    Random Person

    10 dagen geleden

    The only thing that I don't like is the rear side windows. Other than that she's sexy.

  37. Jerry F

    Jerry F

    10 dagen geleden

    It’s like watching the batmobile being built....

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      by carpenters

  38. Toby Surmann

    Toby Surmann

    11 dagen geleden

    It’s spring - MOAR BOAT PLEEZE

  39. dak r34

    dak r34

    11 dagen geleden

    Get ur mustang back quit being a puss.. hire a lawyer and get our elanor build back.

  40. Good


    11 dagen geleden

    Dude that’s beyond low and the back springs are gonna get killed out there. I hope you get proper shocks and everything

  41. snowfalls101


    11 dagen geleden

    The bolts for these don't exist.... what? Flat head allen drive machine screws my dude. Edit:a letter

  42. Jack Kingston

    Jack Kingston

    11 dagen geleden

    This is the first time I’ve been back since the wide body gtr.. what kind of wonder crack are you smoking I love this thing lol

  43. degz1s


    11 dagen geleden

    B is for sketch

  44. Martin Meaney

    Martin Meaney

    11 dagen geleden

    I think add 5 to 6 inches in height and travel she be sickkk

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      8" to 12" would be much better,this thing is gonna SLAM into the ground over and over again

  45. Loopy Mind

    Loopy Mind

    11 dagen geleden

    so the axle isn't going to hit the frame???

  46. Lucas Jensen

    Lucas Jensen

    11 dagen geleden

    This car belongs in a fast and furious movie

  47. Token Bluntz

    Token Bluntz

    11 dagen geleden

    i hope u order like 4 of those axles ... cant go to autozone for a new one lol

  48. Benjamin Anderson

    Benjamin Anderson

    11 dagen geleden

    That thing is a monster🤣 where the heck are ya goin' to park that? 👍

  49. Daksh Malhotra

    Daksh Malhotra

    11 dagen geleden


    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden


  50. tyran melancon

    tyran melancon

    11 dagen geleden

    The single seater eights months later? That’s why I subscribed, no updates, just a forgotten promise?

  51. Matthew Cherrington

    Matthew Cherrington

    11 dagen geleden

    I feel like you should drop the upper shock mounts now and get that extra ground clearance before it's any further along.



    11 dagen geleden

    I miss the old days when you where building cars that are affordable screw a lambo build a 97 k1500 z71

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      why? not interesting,its better to watch them fail at this

  53. Celtic Dude

    Celtic Dude

    11 dagen geleden

    It's Sitting to low!

  54. Andrew Travers

    Andrew Travers

    11 dagen geleden

    Hope ur going to move the Hyd shock reservoir. It right next to header and u don’t want the fluid to get hot.

  55. LRT Racing team

    LRT Racing team

    11 dagen geleden

    When will we see the boat

  56. Nomaad's Ghost

    Nomaad's Ghost

    12 dagen geleden

    .. save yourself the headache and edit the frame above the wheel, gonna save you hours of back and forth trying to figure out weight distribution.

  57. tobias Andersen

    tobias Andersen

    12 dagen geleden

    What engine does it have ? And love ypur project

  58. Genifer Teal

    Genifer Teal

    12 dagen geleden

    Just came across similar build:

  59. Viktor Fruehauf

    Viktor Fruehauf

    12 dagen geleden

    You should lift it, it would look a lot better.

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      they should lift it,then it will actually WORK.IT ISNT GOING TO WORK AS IT IS.....LOOKS ARE IRRELEVANT

  60. bradley carne

    bradley carne

    12 dagen geleden

    Chris, you should take a break when you get a chance, you look like you haven't slept in a few nights. Look after yourself first

  61. Tiller


    12 dagen geleden

    This thing looks heavy heavy

  62. Marciaus007


    12 dagen geleden

    Build team FTW!

  63. Scott Morse

    Scott Morse

    12 dagen geleden

    You do seems shy on the wheel travel. Awesome build. I look forward to it every week

  64. Keith Piskur

    Keith Piskur

    12 dagen geleden

    @ 10:55 thought fasterproms channel started playing on another tab or something...

  65. James Weaver

    James Weaver

    12 dagen geleden


  66. Corey Gilbert

    Corey Gilbert

    12 dagen geleden

    You also can also change your oil viscosity inside your shocks along with preload on your springs and dampening adjustment on your reservoirs.. that will help keep the ride height stiff until you are moving and cycling your travel

  67. RigorMortisItrium


    12 dagen geleden

    Just came across this 'thing'. I love it already. There is something awesome in taking a vehicle that's designed for speed on smooth roads and making it a dirt / off-road car. It's like taking a fish out of water and telling it to run hurdles XD.

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      its too low and wont do offroad as it is

  68. Kamil


    12 dagen geleden

    when i squint hard enough... batmobile...

  69. Xanth3r


    12 dagen geleden

    I've been watching this series intermittently and I'm sure this has been answered in one of the videos I missed, but wasn't this build meant for a race on 3 March 2021?

  70. Scopestyle


    12 dagen geleden

    B is for Boat Episode confirmed! 😁

  71. QuadRiding Rob

    QuadRiding Rob

    12 dagen geleden

    I would lift it some more I feel like it would hit honestly just my opinion

  72. Overspray


    12 dagen geleden

    Love the mini mill very cool

  73. Goaty McGoatface

    Goaty McGoatface

    12 dagen geleden

    Machinist watching yall take the flappy wheel to his hub adapters: "NOOOOOOOoooooOOOOOOO"

  74. Jim Patrick

    Jim Patrick

    12 dagen geleden

    Where’s the boat?

  75. Joey Strittmatter

    Joey Strittmatter

    12 dagen geleden

    It's called counter boring for the head of the shocking boats just so you know

  76. contradicsean


    12 dagen geleden

    In retrospect, why not adjust the more tough rear springs first then use the weaker springs to do the minute adjustments..l think u should read and research before doing some of that suspension work

  77. J Ram

    J Ram

    12 dagen geleden

    B is for Boat , let's get an update

  78. Jacob Boling

    Jacob Boling

    12 dagen geleden

    Biggest build yet

  79. Jacob Boling

    Jacob Boling

    12 dagen geleden

    Yo,you guys out there that can't afford to this kinda of stuff should look into hobby grade scale rc,cause this shits cooler than an rc but he's doing the same shit I do in my hobby this shits just on a bigger level.

  80. Lewis Harrad

    Lewis Harrad

    12 dagen geleden

    What is the engine used?

  81. Corey Moyers

    Corey Moyers

    12 dagen geleden

    Taller tires are better off-road. Go tall or go home.

  82. Romeo Stojanovski

    Romeo Stojanovski

    12 dagen geleden

    I hope the house videos are better than Goonsquads

  83. TJ Thompson

    TJ Thompson

    12 dagen geleden

    Looks like it’s gonna bottom out on everything..

  84. Tyson Fry

    Tyson Fry

    13 dagen geleden

    The telling relative conversely deceive because stopwatch ultrascructurally unite next a hushed step-brother. kaput, relieved push

  85. Robert Tillich

    Robert Tillich

    13 dagen geleden

    For a second there I thought I was watching Fasterproms what with the soundtrack and all haha. build is looking good!

  86. Charless Holsinger

    Charless Holsinger

    13 dagen geleden

    you need to check what the axle shaft does at full extension on the bottom rail

  87. David Ball

    David Ball

    13 dagen geleden

    Little bit of learning as you go.....That's the best kind of knowledge to obtain!!!

  88. micro christ

    micro christ

    13 dagen geleden

    This thing better be lambo golden yellow



    13 dagen geleden

    Singer Porsche Safari.... BforB: I'm safaring a Lambo.( tongue sticking out)

  90. Amish Electrician

    Amish Electrician

    13 dagen geleden

    Lol. "When we get into testing, and find we are riding too low.." That would require you guys to actually finish a project car. Still waiting on the Burntican to be finished.

  91. Erik Granqvist

    Erik Granqvist

    13 dagen geleden

    How is the clearence of axels when the suspension is extended/compressed at it's maximum?

  92. Leon Millson

    Leon Millson

    13 dagen geleden

    Great build guys

  93. Swetank Shirodkar

    Swetank Shirodkar

    13 dagen geleden

    Won’t work

  94. Carson Taylor

    Carson Taylor

    13 dagen geleden

    I think a pretty sick build would be taking a nissan 240sx and making it an r34 GT-R

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      do it,we can think of lots of awesome things but its fucking pointless,isnt it?

  95. andyz bak

    andyz bak

    13 dagen geleden

    Anyone else check their phone at 8:02

  96. Der Pate

    Der Pate

    13 dagen geleden

    You should consider wrapping the back end with a thick durable wrap vs using sheet metal. It would shave off a few lbs on that back end, you could do a faux carbon fiber....

  97. medevilmonkey


    13 dagen geleden

    I think dual shocks in the rear would look more appropriate for such a crazy build love it though

  98. don griffin

    don griffin

    13 dagen geleden

    Where’s the boat ??

  99. Alexander Familo

    Alexander Familo

    13 dagen geleden

    You guys are gonna be destroying that underbody with just 12 in of ground clearance...

    • trillrif axegrindor

      trillrif axegrindor

      10 dagen geleden

      there aint no 12" of ground clearance on this car.remember,driver,interior,wiring,guages ,seats everything else

  100. DJ WRAITH


    13 dagen geleden

    This is going to be really cool!